The router is one of the most versatile woodworking power tools available. It may be used to automate traditional carpentry techniques like creating mortice & tenon or dovetail joints right through to trimming contemporary materials like engineered timber or laminates. The versatility of the router is enhanced considerably by the multitude of router bits and jigs that are available. Thus, it’s no surprise that a router can be found in most respectable carpenters’ tool vaults. Buying a router can be a daunting task. There’s a good deal of technical jargon to understand. In this, we’ve summarised a few things to consider when you are considering investing in a router. It is, by no means, an exhaustive listing. Broadly speaking, routers can be split into three classes which are heavy duty, medium duty, and light duty. The light duty routers are sometimes known as “handheld” routers. Check out the following website, if you’re searching for more details about high gain 4g antenna.
Light duty routers are only really intended for basic operations like trimming. They’re lightweight, not very powerful and are, therefore, designed for infrequent use. Medium duty routers are more powerful and bulkier. They may be used to perform more demanding tasks and are designed to be used regularly. Heavy duty routers are on top of the range varieties. They are the most powerful and are designed to be used for daily milling operations. They may be used for hand milling and may also be table-mounted for use as fixed routers. Collet corresponds to where the router bit is attached to the router. The collet diameter is equivalent to the direction bit diameter. They are available in two sizes. The size of the bit also determines how much material can be routed out in one pass and thus impacts the strain that’s set on the router’s motor.
It would be pertinent to navigate through the broad variety of router bits available in the market before deciding which router to buy. Routers usually include variable speed control. This variable speed corresponds to how quickly the motor, and therefore, the router bit turns. While this is not a crucial requirement, it is worth paying a bit extra for it if your budget allows. As we learned earlier, the larger the router bit, the more stuff it’ll remove with each pass. It’s good practice to reduce the speed of the engine when using larger bits to decrease the strain on the bit and, ultimately, the motor. Soft start is a feature usually found in moderate to heavy-duty routers. The soft start means that the when the motor is started, it slowly increases in speed. This is a useful feature to have as it means that the tool will not push or pull suddenly as you start routing. This feature makes the entire routing operation smoother and can prolong the life of the router and router bits. Again, it’s well worth going for a router with this feature, if you budget permits.
